Aluminium entry doors · Despiro by Eko-Okna

Three inches of aluminium, 105 ways.

A Despiro door is a 3-inch insulated core with a 3 mm aluminium sheet bonded to each face — the grooves, inlays and glazing are milled into real metal, not pressed into a skin. Pick the design; everything else is made to your opening.

From $10,000 installed · every door is measured and quoted

Browse all 105 designs ↓ Call (201) 633-5796

Despiro aluminium entry door, design DP24

105panel designs

3"panel thickness

1/8"aluminium on both faces

RAL K7any colour, plus custom powder

Three ranges, one door

Every design below is built into the same aluminium door. What changes is how the face is made — and that is the whole decision.

Despiro

The main range. A 3-inch aluminium panel filled with insulation, built to order — timeless in the plain grooved designs, dramatic in the stainless and glazed ones. Selected designs take safety glazing or recessed LED-lit pull handles.

53 designs

Retro Line (overlay)

Classic elegance on the modern panel. The overlay build applies the moulding on top of a full 3-inch Despiro panel, so you get traditional proportions with the thermal performance and the flat-panel rigidity of the modern range.

26 designs

Retro Line (insert)

The same 26 classic designs, built as an insert panel inside the door frame rather than laid over it — simple shapes, safety-glazed lights and traditional hardware. Panel thickness follows the design.

26 designs

The system

What it is built on

The panel is the face; the system is the aluminium around it. Drag the section to turn it and you can see the thermal break the whole door depends on.

MasterLine 8 Despiro — cutaway section through the frame, sash, thermal break and glazing

360° section through the frame, sash, thermal break and glazing unit.

Aluprof MasterLine 8 Hinged

MasterLine 8 Despiro

The standard-swing Despiro door — 3 mm aluminium skin, up to 9'10" tall.

Despiro aluminium doors on the MasterLine 8 system: reliability in an elegant, minimalist form. Doors go as high as three metres, and the resistance to damage comes from a 3 mm aluminium sheet on both the inside and the outside face.

3 mm aluminium on both faces — this is not a foil-wrapped skin
Takes any Despiro or Despiro Retro Line panel design
Standard hinged swing, so it fits ordinary rough openings

MasterLine 8 Despiro specifications
Profile construction depth	3" (77 mm)
Panel thickness	3" (77 mm)
Aluminium sheet thickness	1/8" (3 mm), inside and outside
Maximum door height	9' 10" (3000 mm)
Maximum door width	4' 11" (1500 mm)
Finish	Full RAL K7 palette; other colors on request by powder code

What the leaf can be filled with

The ranges Eko-Okna list for this system. Each keeps its own size limits — a panel is never built past its own maximum, however large the leaf is allowed to be.

Specifications published by the manufacturer · Eko-Okna product page ↗

Live catalog

All 105 designs

Filter by range or type a code. Every design opens its own page with the full render and specification.

The dramatic option

Aluminium pivot doors →

Leaves to 13 feet on a concealed offset axis, from $15,000 installed.

Manufacturer catalogue

Entrance door catalogue (PDF) ↓

The full Eko-Okna entrance-door book — 20 MB, opens in a new tab.

Found one? Let's price it properly

Send us the design code and your rough opening. We confirm the size against that design's limits, spec the glazing and hardware, and quote it installed.

Free showroom & phone consultation · No pressure · Mon–Sat 11am – 6pm

Call (201) 633-5796 Get directions → Design your door